Profileimage by AdwaitA Joshi LabVIEW Development from Bruckmuehl

Adwait A. Joshi

available

Last update: 06.09.2022

LabVIEW Development

Company: TMCS
Graduation: Bachelor of Engineering (BE) in Instrumentation and Control from Pune University in 2014
Hourly-/Daily rates: show
Languages: German (Limited professional) | English (Native or Bilingual)

Skills

Software skills with LabVIEW
  • Design, Developed, and integrate LabVIEW based Applications for automated test, data acquisition, and control systems.
  • System Study, System and Application technical feasibility check.
  • In- House and On-Site LabVIEW Application Development
  • Prepare Required Documentation like requirements analysis, end user documentation user manual and
  • SOPInstallation, Commissioning and Validation of the projec
Hardware Interfaced with LabVIEW
  • Keithley 2182A Nanovoltmeter
  • Keithley 6221 Current Source
  • Energy Meters(Cologicx, Socomec, Schneider and Secure)
  • Yokogawa MW 100
  • Yokogawa WT310
  • Yokogawa 230
  • Programmable AC Source
  • Programmable DC Load
  • Siemens PLC(S7 1200 & ET 200S)
  • GSM Module
  • BTC PID’s(9100,8100,9300), BTC Thermocouple Module AI 8, Delta VFD ,
  • RoboteQ Drive ,Danfoss VFD
CERTIFICATION on LabVIEW
  • LabVIEW Core I and Core II , CLD Training from National Instruments
Other programming languages
  • C
  • Arduino
  • PLC (Programmable Logic Controller)
  • SCADA software: VijeoCitec, CoDeSys, M3 soft, RSLOGIX5000, Connected Component Workbench, Zelio
System Administration Windows
  • Migration W7 to W10
  • Network integration of W10
  • Support and administration of W10
  • Backup under W10

Project history

09/2019 - 12/2019
System Study, Communication VI with 6 RoboteQ make Drive over Serial Communication and looped via CAN. CAN commands send over serial and Study System operation. Developing Front Panel.
Precision Controls

Project Description:
Using 6 RoboteQ Drive and 10 Jayshree Make BLDC motor, LabVIEW controls 3 Arms of the system with multiple tools used to de-core the fins in the system.
System also consist of Load measurement of Load Cell, Controlling Position of the all 3 Arms with different tools to remove Fins, Fasteners, Pouring plug and cylinder.

03/2019 - 09/2019
System Study, Feasibility check – Proof of Concept, Validation of System as per SOP with logic and software, on-site modification in code, Troubleshooting.
N-Gen Control

Data Acquisition and Controlling 8 Drive Simultaneously to perform endurance testing over Seat.
2 Applications were developed for 3 drive Seat Testing and 8 Drive Seat testing

10/2018 - 03/2019
Studied & Upgraded previous developed code, added additional functionality for rating calculation and database integration for IOT and Report Generation VI, Server Client Integration.
CEAT Tyres

Project Description:
Designed and developed Application for monitoring and recording parameters like temperature, pressure, flow from 8 PLR’s for 12 Trenches.
Software also included Overall Rating Calculation of all the trenches with user define Report generation of Daily Weekly Monthly and Yearly. Data is also stored in mySQL database. System has 1 Server PC and 5 Client PC

03/2018 - 10/2018
System Study, VI for Keithley Programmable Power Supply, Database Integration, CAN Communication ECU DBC file, Validation, on-site modification in code, Troubleshooting
Varroc Engineering – Research & Development

Project Description:
Designed and developed Performance and Endurance Testing for Cluster, Application consists of Simulating parameters RPM, Speedometer, High Beam indication, Neutral, Backlight, Side Stand, Fuel Bar, Ignition, Battery Indication of CAN and Non-CAN based DUT.

11/2017 - 03/2018
Communicated Cologics Energy Meter and Autonics RPM Meter Over LabVIEW
Lawkim Motors

Project Description:
Designed and developed Application for monitoring and acquisition of data from Motor & Drive Test Rigs. Data Acquiring from 12 Station Simultaneously. Test Conducted on DUT are KWH Test, ON OFF Test and LOAD / Line Regulation. Data saved in Excel Format. Data Acquired Using RPM Meter, BTC Thermocouple Module AI 8 and Energy Meters through RS 485 Communication. Displaying Online and Historical Data both in Graphical and Tabular Formats. Generation of Alarms and Report.

Local Availability

Open to travel worldwide
Availability on customer site in Europe
  •  three months on site without interruption
  • 2 x three months with interruption of two month
Availability on site and offshore via remote

Other

This high skilled LabVIEW Developer is employee of TMCS Group and specialized on LabView Applications.
His Homebase is India/Pune with onsite presence on customer demand.
The work contract will be direct with TMCS via contact given in this profile.
Profileimage by AdwaitA Joshi LabVIEW Development from Bruckmuehl LabVIEW Development
Register