Upgrade Post project
Profileimage by Michael Serha design engineer from Krobia

Michael Serha

Krobia
available

Last update: 20.10.2023

design engineer

Graduation: Dnepropetrovsk National University, Institute of Physics and Technology, Dnipro, higher. Qualification: - specialist, systems engineer. Specialty - radio engineering systems and complexes. Diploma with honors. Dnipro National University of Railway Transpo
Hourly-/Daily rates: show
Languages: English (Limited professional) | Polish (Limited professional) | Russian (Native or Bilingual) | Ukrainian (Native or Bilingual)

Keywords

Attachments

Michael-Serha-CV_201023.pdf

Portfolio

Reactor
Desorber
Engine-generator
Frame
Bearinghouse
Module
Steam boiler
Heat recovery system
Reactor

Skills

Professional skills
– design and construction of buildings and structures for industrial use;
– chemical-technological and heat engineering calculations;
– structural calculations of steel and reinforced concrete parts of buildings and structures, taking into account static and dynamic loads;
– development and implementation of specialized technological equipment;
– design, installation and operation of engineering systems and nets;
– development and implementation of measures aimed at improving the energy efficiency of the enterprise;
– knowledge of the technology of conducting construction and installation works, welding production;
– development of systems for measuring physical (mechanical, electrical, thermal) quantities, systems for diagnostics and non-destructive testing;
– development of process control systems;
– development and adjustment of electronic units for various purposes, preparation of documentation for production;
– development of embedded software and related radio engineering systems;
– preparation of reporting, executive and working documentation: – schemes, plans, reports, diagrams, releases, schedules, etc.;
– development and preparation of instructions, training programs for the personnel of technological lines, workshops being put into operation, passports for instruments and equipment, etc.

Project history

08/2022 - Present
Structural mechanical calculations and design. ACS design. Constructions design, Special measuring system and electronics design
(Energy, water and environment, 10-50 employees)
Robotic system for wind turbine services
01/2020 - 02/2022
Full technological, chemicals, structural and construction design, heat exchange calculation. Developing and design ACS systems, special electronics and software’s.
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Complex for processing agricultural plant waste for the production of commercial gas methane and liquid carbon dioxide with a capacity of 1,200 m3/h of methane and up to 20 t/day of liquid carbon dioxide
Consisting of:
Fuel crushing and storage reception system
Reactor for gasification of carbon dioxide in the gas phase in a fluidized bed
Hydrocarbon cracking column
Absorption-desorption installation for the release of carbon dioxide
Design of a carbon dioxide liquefaction installation
Design of a cryogenic methane rectification installation
Auxiliary gas generator unit to power the gasification reactor and steam boilers
Heat recovery and steam production installation with a capacity of 5 tons of steam/hour
ACS TP system of the complex
11/2019 - 01/2020
Construction design, heat exchanger calculation
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Boiler heat recovery of waste gases from the gas piston engine of a generating set with a power of 0.5 MW
01/2019 - 11/2019
Structural system design. Components choosing. ACS systems design. Construction design. Technological design. Chemical –heat calculation. Developing and design special electronics and software’s
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Gas engine for operation on low-calorie gas fuel based on the YAMZ238 engine with conversion of the engine from diesel oil to gas fuel
Station for measuring the parameters of the engine-generator installation
Design and installation of supply voltage stabilization 200 kVA, 0.4 kV with power factor regulation
Gas generator for gasification of agricultural waste instead of natural gas used to power technological gas devices with a thermal power of 6 MW
06/2018 - 12/2018
Structural system design. Components choosing. Construction design. Electrical, heat and mechanical calculations
„Bio-Energy” LTD (Energy, water and environment, 50-250 employees)
Complete power distribution installation for paper production equipment with a dissipated power of 10 MW and a controlled electric drive system with a power of 3 MW
Design and installation for the disposal of printed circuit boards of electronic devices with the separation of tin-lead solder in the form of an ingot, copper in the form of copper powder, separation of aluminum alloys and ferrous metals and thermal gasification of thermosetting plastics, with a raw material capacity of 2 t/day
01/2018 - 06/2018
ACS systems design. Structural system design. Components choosing
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Design of a steam boiler room for solid fuels with a steam capacity of 3 tons of steam per hour
09/2016 - 12/2017
Construction design. Technological design. Design electronics circuit and systems
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Design and installation of ultrasonic dewatering of paper cloth during production
Design and installation of convection and conduction paper drying
Design and installation for drying paper fabrics with an infrared heater with gas fuel with a power of 1.5 MW
Design and installation for measuring paper parameters in the production process

09/2015 - 08/2016
Structural system design. Components choosing. ACS systems design. Construction design. Technological design
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Design and installation of a closed electro-chemical-flotation circuit for the treatment of waste water from paper production
11/2014 - 09/2015
Design special heater and burners. ACS systems design
„LOTUS” LTD (Energy, water and environment, 50-250 employees)
Mini-factory for the production of sanitary paper
Development of a plant construction project
Development of a mass production project
11/2013 - 11/2014
Heating system design. ACS systems design.
„VIF” LTD (Energy, water and environment, 250-500 employees)
Design of a steam boiler room for solid fuels with a steam capacity of 10 tons of steam per hour
06/2013 - 10/2013
Heating system design. Waters recovery system design.
Dairy "Zarog" LTD (Energy, water and environment, 50-250 employees)
Design of a treatment plant complex for a dairy plant with a capacity of up to 100 m3/day
07/2011 - 06/2013
Heating system design. Waters recovery system design.
„Status - PAP” LTD (Industry and mechanical engineering, 10-50 employees)
Mini-factory for the production of sanitary paper
09/2009 - 06/2011
Structural system design. Components choosing. ACS systems design. Construction design. Technological design
„Novomoskovsk Knitting Factory” LTD (Energy, water and environment, 500-1000 employees)
Design of a closed-circuit electrochemical wastewater treatment complex after the production of knitted fabrics with a capacity of up to 100 m3/day
04/2009 - 09/2009
Structural system design. Components choosing. ACS systems design. Construction design. Technological design
„Novomoskovsk Knitting Factory” LTD (Energy, water and environment, 500-1000 employees)
Design and installation of heat utilization after steam treatment of knitwear in autoclaves with a power of 0.5 MW per body with cold production using the absorption-desorption cycle
09/2008 - 12/2008
ACS systems design. Structural system design. Components choosing
„Novomoskovsk Knitting Factory” LTD (Energy, water and environment, 500-1000 employees)
Design of a steam boiler room with a steam capacity of 2 tons of steam per hour
08/2006 - 08/2008
ACS systems design. Structural system design. Components choosing. Heat flow calculations.
„MPP On Line Dniepr” LTD (Architecture and civil engineering, 50-250 employees)
Design of a ventilation and air-conditioning installation for an oversized tire workshop with an area of 20,000 m2
Design of a heating, ventilation and air conditioning installation for a shopping complex with an area of 10,000 m2 in Dnipro city
Projects of ventilation installations for special technological equipment
05/2006 - 08/2006
Power electronic design. Design measuring sensors and signals processing algorithms
„Koloryt” LTD (Industry and mechanical engineering, 50-250 employees)
Plasmatron power supply module for the non-fire plasma chemical treatment of steel system
07/2003 - 05/2006
ACS systems design. Mechanical drivers design. Construction design.
„Innomedyka” LTD (Industry and mechanical engineering, 50-250 employees)
Mini-factory for the production of perfumes and cosmetics
Packing - packaging line
01/2003 - 11/2004
Developing and design electronics circuit and systems, signals processing algorithms
„Wesna-Komplekt” LTD (Telecommunications, 10-50 employees)
Underground radio communication and emergency notification system
Vesna NSh-3, Vesna NSh-3M complexes.
09/2002 - 01/2003
Developing and design electronics circuit and systems, signals processing algorithms
Przedsiębiorstwo Produkcyjno-Handlowe "Stalprom" LTD. Physico-Technical Institute of Dnipropetrovsk National University (Industry and mechanical engineering, 1000-5000 employees)
Electromagnetic-acoustic control system for railway wheels
11/2001 - 08/2002
Developing and design electronics circuit and systems, signals processing algorithms
Przedsiębiorstwo Produkcyjno-Handlowe "Stalprom" LTD. Physico-Technical Institute of Dnipropetrovsk National University (Industry and mechanical engineering, 1000-5000 employees)
Design and installation of X-ray structural analysis of pipe welding seams for ongoing inspection.
Ultrasonic control system for aircraft tire cord delamination
04/2000 - 11/2001
Developing and design electronics circuit and systems
Przedsiębiorstwo Produkcyjno-Handlowe "Stalprom" LTD. Physico-Technical Institute of Dnipropetrovsk National University (Industry and mechanical engineering, 1000-5000 employees)
Non-destructive ultrasonic inspection system for boiler tubes

Local Availability

Open to travel worldwide
Profileimage by Michael Serha design engineer from Krobia design engineer
Register