Electrical Engineer, Electrical Designer, Electrical Engineer

ACTIVITIES: Development the "AS BUILT" 3D model of
the facility. It covers: modelling equipments such as:
Conduits and Luminaries

Software used:
- CADWorx.
- RECAP PRO (Points cloud).
- Dialux Evo

Tecnoconsult POSITION: Electrical Engineer

ACTIVITIES: Development the "AS BUILT" 3D model of
the facility. It covers: modelling equipments such as;
Pump Motor skid and electrical equipments (qty 323),
Cable tray routing (more than 3000 ft.)
Software used:
- CADWorx Plant (Cable Tray)
- CADworx Equipment (Electrical Motors and
Panelboards)
- RECAP PRO (Points cloud).

ACTIVITIES: Cable Tray design, Load summary,
Construction Scope of Work, Indoor Lighting in existing
facilities to be modified

Software used:
- DIAlux Evo
- AutoCAD

Tecnoconsult POSITION: Electrical Engineer

ACTIVITIES: 3D Cable Tray design (Cadworx software),
assistance for 60% Model review, Load summary,
Outdoor and Indoor Lighting design and calculation
(Dialux Evo software), Bill of Materials, Cable Schedule

Software used:
- CADWorx Plant
- DIAlux Evo
- AutoCAD

P4_CV-TC-01-ENG-RANGEL JOHN Rev 2

11/2017 - PROJECT NAME:
03/2017 Cluster JA-26 construction

SCOPE: Detailed Engineering

CLIENT:.PDVSA Junín Sur

ACTIVITIES: Outdoor/Indoor Lighting, Grounding,
Feeder sizing and derating, Load summary.

Software used:
- ETAP
- DIAlux Evo
- AutoCAD


Otepi Consultores S.A POSITION: Electrical Engineer

ACTIVITIES: Indoor Lighting based on movemet
sensors, Grounding, Feeders sizing and derating Power
Panel schedule and Lighting panelboard schedule, Bill
of materials, Technical specifications.

Software used:
- AutoCAD

ACTIVITIES: Outdoor/Indoor Lighting, Grounding,
Feeder sizing and derating, Load summary, Aerial
Electrical Distribution Lines - Route.

Software used:
- ETAP
- DIAlux Evo
- AutoCAD

ACTIVITIES: Engineering Review (Basic and Details
Engineering) for Electrical Design

modernization - Caraballeda, Vargas State.

SCOPE: Detailed Engineering

CLIENT:.LandScape

AB proyectos e InspeccionesPOSITION: Electrical Engineer

ACTIVITIES: Outdoor/Indoor Lighting, Grounding,
Feeder sizing, Bill of materials.

Software used:
- ETAP
- DIAlux Evo
- AutoCAD


AB proyectos e Inspecciones POSITION: Electrical Engineer

ACTIVITIES: Grounding design and calculation,
Cathodic System calculation, design and specification,
Outdoor Lighting design and calculation, Bill of
materials, Scope of work

Software used:
- ETAP
- DIAlux Evo
- AutoCAD

05/2014 - PROJECT NAME:
07/2014 Engineering Review "Valve Stations -
TERMOCENTRO Detailed Engineering project"

SCOPE: Engineering Review

CLIENT:. PDVSA Gas

Sodinsa S.A POSITION: Electrical Engineer

ACTIVITIES: Outdoor/Indoor Lighting calculation and
design, Grounding grid calculation (ETAP), Feeder
sizing and derating, Load summary, Cathodic Protection
calculation and design, Technical specifications..

Software used:
- ETAP
- DIAlux Evo
- AutoCAD

SCOPE: Basic and Detailed Engineer ACTIVITIES:
- 3D modeling of Electrical Equipment (Cabletray,
CLIENT: HARGROVE. Lighting, Panelboard and Remote Control Station).
- Preparation and Extraction of drawing from the
drawing editor.
- Lighting Design.

Software used:
- Smart Plant 3D
- Navisworks.
- Dialux Evo

ACTIVITIES: 3D design and modelling of new units in
SCOPE: IPC existing plant (Cable Trays and electrical equipments) .

CLIENT: FORMOSA PLASTICS-HARGROVE. Software used:
- AutoCAD.
- Navisworks.

3D modelling using SP3D software in a multidisciplinary
SCOPE: Interdisciplinary Project Modelling project, following specifications and library, including:
using Smart Plant Electrical - Routing Conduit modelling (Edit, move, delete, copy,
paste, rotate, hold, change the width, Insert transition,
component)
- Cableways Routing modelling (Edit, move, delete,
copy, paste, rotate, hold, change the width, Insert
transition, component) .
- Duct Bank Routing Modeling (Edit, move, delete, copy,
paste, rotate, hold, change the width)
- Luminaires and PanelboarDs modelling
- Support and installation of Equipments connected to
conduit.
- Handle of visualization Tools

Software used:
- Smart Plant 3D.
- Navisworks.

AREA

SCOPE: 3D Modelling

CLIENT: HARGROVE

Tecnoconsult POSITION: Electrical Engineer

ACTIVITIES: 3D Modelling of existing facilities -
Onshore platform (luminaires, electrical equipments,
substation, cable trays) using AutoCAD and
AdvanceSteel and, as support for modelling and
verification, was used RECAP and Navisworks Manage

Software used:
- AutoCAD.
- Navisworks.
- Advance Steel.
- Recap Pro.




Tecnoconsult POSITION: Electrical Engineer

ACTIVITIES: 3D Modelling of existing facilities
(luminaires, conduits, cable trays) using AutoCAD,
Recap Pro and Navisworks

Software used:
- AutoCAD 3D.
- Navisworks Manage
- Recap Pro.

P4_CV-TC-01-ENG-RANGEL JOHN Rev 2

06/2019 - As Built and Conversion of Drawings /
10/2019 Documents to SmartPlant Enterprise - Habshan
Phase 1

SCOPE: Conversion of As built Drawings and
Documents to SmartPlant Electrical (SPEL)


CLIENT: Abu Dhabi Gas Industries Limited
(GASCO)

PROJECT

SCOPE: Basic and Detailed Engineering

CLIENT:.HARGROVE

Tecnoconsult POSITION: Electrical Engineer

ACTIVITIES: Updating of Single Line Diagram,
Schematic Drawing of Switchgear, Cable List, Data
Sheet of Electrical Equipment and Motors based Red
Line Mark Up.
Generation Single Line Diagrams and Schematic
Diagram of Switchgear and Reports (Data Sheet of
Electrical Equipment and Motors, Panel Schedule, Load
List, Motor List, Cable List, Cable Take Off)

Software used:
- Smart Plant Electrical

Plant JOSÉ MARÍA ESPAÑA (J.M.E)"

SCOPE: Basic and Detailed Enginnering

CLIENT:.PDVSA Gas

Otepi Consultores S.A POSITION: Electrical Engineer

ACTIVITIES:
Engineering Review for 115/230/400kV Substation
Electrical Design. Translation of comments for CAMCE
(Shangai-China)

Software used:
- AutoCAD


Sodinsa S.A POSITION: Electrical Engineer

ACTIVITIES: Outdoor/Indoor Lighting, Grounding grid
calculation and design (ETAP), Feeder sizing and
derating, Load summary, Cathodic Protection (design
and calculation), Bill of materials, Technical
specifications