Description
These are 2 short programs of 50-80 lines (each)1. Wattmeter with constant impedances (for example 50?)
Calculation of instantaneous and average power and output to LSD in the program edsim51
(2. Thermometer - that monitors the current temperature based on voltage measurements from the A/C converter. The user should be able to set two parameters: upper
and a lower threshold beyond which the measured signal should not go. If it happens, it should
LED should be lit (one for the value too high, the other for the value too low).
The selection of LEDs should be made using switches.)
There are other shorts programs, so if you can program on EDSIM-51, write to me
http://www.circuitstoday.com/voltmeter-using-8051
Sample projects (but an example was not created for edsim51)