Electronic Design Engineer
Procenne Digital Security Inc.
Keywords
Hardware Design
Raspberry Pi
Artificial Intelligence
Altium Designer
JIRA
C++ (Programming Language)
Linux
Microprocessors
Distributed Systems
Electronics Manufacturing
Skills
Hello, This is Hasan from Turkiye. I have been working as a hardware design engineer for 9 years. If you need help for your hardware projects, I can help you. I can work for remote projects.
Some of the projects I have done recently:
Power supply with flyback(up to 20W),
Voltage protection relays,
Raspberry pi 4 shield
GSM Module with STM32
Opamp, DAC, ADC based projects,
Nvidia Jetson Nano Carrier Board.
Altium Designer,
Diptrace,
Artificial intelligence,
C Programming,
Power distribution systems,
Embedded software,
FPGA Based Hardware Design,
Hardware Design,
Hardware tests,
LTSpice,
Linux operating system,
Microprocessor,
Microcontroller,PCB Layout,
Raspberry Pi,
Git, Jira, SVN
Some of the projects I have done recently:
Power supply with flyback(up to 20W),
Voltage protection relays,
Raspberry pi 4 shield
GSM Module with STM32
Opamp, DAC, ADC based projects,
Nvidia Jetson Nano Carrier Board.
Altium Designer,
Diptrace,
Artificial intelligence,
C Programming,
Power distribution systems,
Embedded software,
FPGA Based Hardware Design,
Hardware Design,
Hardware tests,
LTSpice,
Linux operating system,
Microprocessor,
Microcontroller,PCB Layout,
Raspberry Pi,
Git, Jira, SVN
Project history
03/2022
-
10/2022
I worked as an Electronic Design Engineer in a company that designs and manufactures Hardware
Security Modules (HSM) in the field of Digital/Cyber security. I have made revisions according to
the demands and requirements of the schematic and PCB designs that have been completed before and
include high-speed lines such as FPGA, DDR, eMMC with BGA sheath. I developed my knowledge and
skills on the Linux operating system. Along with these, I received online and face-to-face technical
trainings (PCB design, Electronic design, Embedded software, Electronic Production) in line with the
opportunities and conditions provided by the company.
Security Modules (HSM) in the field of Digital/Cyber security. I have made revisions according to
the demands and requirements of the schematic and PCB designs that have been completed before and
include high-speed lines such as FPGA, DDR, eMMC with BGA sheath. I developed my knowledge and
skills on the Linux operating system. Along with these, I received online and face-to-face technical
trainings (PCB design, Electronic design, Embedded software, Electronic Production) in line with the
opportunities and conditions provided by the company.
07/2021
-
03/2022
Hardware Design Engineer
Pavo Design Production Electronics Inc.
I worked as a Hardware Design Engineer at R&D company, which provides services in the field of Power
electronics, Communication and Network Technologies, Avionics systems. As part of the Power and
Energy Directorate, I was responsible for the design of civil and military power systems according
to customer needs and requests, updating the PCB and Schematics, the design of which has been
completed or ongoing for energy measurement and monitoring systems, and the creation of production
documents. Finally, the projects I've been working on are mostly on power distribution systems. In
my last project, I made 8 and 6 layer (with high current lines) and 12 layers (FPGA and military
connectors) PCB designs. After defining the schematic and rules, I transferred the PCB files to the
PCB design technicians. During the layout, the design is made in consultation with each other.
electronics, Communication and Network Technologies, Avionics systems. As part of the Power and
Energy Directorate, I was responsible for the design of civil and military power systems according
to customer needs and requests, updating the PCB and Schematics, the design of which has been
completed or ongoing for energy measurement and monitoring systems, and the creation of production
documents. Finally, the projects I've been working on are mostly on power distribution systems. In
my last project, I made 8 and 6 layer (with high current lines) and 12 layers (FPGA and military
connectors) PCB designs. After defining the schematic and rules, I transferred the PCB files to the
PCB design technicians. During the layout, the design is made in consultation with each other.
03/2018
-
07/2021
R&D Hardware Engineer
Tense Elektrik Elektronik
I worked as a hardware design engineer in the company that produces power electronics, reactive
power compensation, protection and control relays, energy measurement devices. Hardware design
processes of new projects and PCB revisions of existing designs.
power compensation, protection and control relays, energy measurement devices. Hardware design
processes of new projects and PCB revisions of existing designs.
01/2018
-
03/2018
R&D Hardware Engineer
Köhler Electricity Meters
I worked as a hardware design and development engineer in a company that produces electronic
electricity meters. I made some revisions in previous jobs.
electricity meters. I made some revisions in previous jobs.
08/2017
-
11/2017
R&D Electronics Engineer
EOS Sustainable Energy Solutions
Designing and developing hardware and software of Atmel Based (Arduino) Smart Home Systems and
Renewable Energy Systems (Wind and Solar Energy). Sensor applications (Gas, Temperature, Current,
Wind, Light)
Renewable Energy Systems (Wind and Solar Energy). Sensor applications (Gas, Temperature, Current,
Wind, Light)
01/2017
-
08/2017
Electronics Production Engineer
Atmaca Elektronik / Sunny
I worked as a Production Engineer in TV and Satellite receiver departments. Carrying out the
production processes at the scheduled times. Actions for reporting, analysis and solution of
problems that arise during production. Use of software (ERP, production automation) used in
production lines. Keeping OEE productivity analysis reports daily
production processes at the scheduled times. Actions for reporting, analysis and solution of
problems that arise during production. Use of software (ERP, production automation) used in
production lines. Keeping OEE productivity analysis reports daily
01/2015
-
01/2017
R&D Hardware Engineer
Atmaca Elektronik / Sunny Technology R&D Center
Electronic circuit diagram design, product development, hardware tests of PCB boards, fault
detection and resolution, project management using ORCAD (Cadence) program in satellite receiver R&D
department. DVB-S2, DVB-T2, DVB-C, OTT Settop Box
detection and resolution, project management using ORCAD (Cadence) program in satellite receiver R&D
department. DVB-S2, DVB-T2, DVB-C, OTT Settop Box
06/2012
-
08/2012
Intern
AES Alpnur Elektronik
I worked on LED lighting systems and got to know the basic electrical circuit elements. I learned
basic information about pic programming.
basic information about pic programming.
Local Availability
Only available for remote work
