08/14/2026 updated
partially available
info: Available evenings and weekends
Electrical and Electronics Engineering Student | Embedded Systems & Hardware Design
Niwai, India
Only remote
B.Tech (Electrical and Electronics Engineering) About me
I am a 4th year B.Tech student currently pursuing Electrical and Electronics Engineering. My areas of interest are Electrical Machines, Power Systems, Power Electronics, AutoCAD design etc. I've completed a 2-month internship at BHEL Bhopal's Heavy Electrical Plant & worked on several projects.
ArduinoElectronic CircuitsEmbedded CEmbedded Systems
Embedded Systems Firmware
Proficiency in C and C++ programming for embedded systems, including Arduino-based system prototyping, sensor integration, and basic hardware interfacing for real-world applications.
Hardware Design
Hands-on experience with hardware design tools such as TinkerCAD and Wowki ESP32 Simulator, enabling the development and simulation of electronic circuits and embedded prototypes.
Communication Protocols
Knowledge and practical application of communication protocols including I2C and UART for enabling data exchange between microcontrollers and peripheral devices.
Power and Control Tools
Foundational knowledge of MATLAB and Simulink for modeling, simulation, and analysis of power and control systems.
Closed-Loop Control Systems
Practical experience implementing closed-loop control systems, demonstrated through the Ball and Beam System project using continuous sensor feedback for real-time position control.
Autonomous Robotics
Development of autonomous robotic systems, including obstacle detection and navigation using ultrasonic sensors, servo motors, and motor driver circuits.
Industrial Electrical Systems
Exposure to transformers, traction motors, switchgear manufacturing, UHV testing, and boiler auxiliaries gained during vocational training at BHEL Bhopal.
IoT and PLC Integration
Basic understanding of IoT-based monitoring systems, including integration of Siemens PLCs with Flask and OPC UA dashboards.
Experience
Professional experience0 - 5 years
Freelancer since2026
Languages
EnglishBasic knowledgeHindiNative speaker
Project history
Designed and implemented a Ball and Beam System to maintain ball position on a beam by continuously adjusting the beam angle based on sensor feedback. Components used include Arduino Uno, Planetary geared Quadrature Encoder DC motor, SMPS, VL53L0X ToF sensor, and L298N Motor driver. The project implements a closed-loop system with continuous sensor feedback.
Designed and developed an autonomous robotic car capable of detecting obstacles and navigating around them without human intervention. Components used include Arduino Uno, HC-SR04 Ultrasonic Sensor, SG90 Servo Motor, L298N Motor Driver, DC Geared Motors, Robot Chassis, Wheels, Jumper Wires, Breadboard, and 12V Battery.
Two-month vocational training with industrial exposure to transformers, traction motors, switchgear manufacturing, UHV testing, and boiler auxiliaries. Developed a basic understanding of MOLA, an IoT-based monitoring system integrating Siemens PLCs with a Flask and OPC UA dashboard.
Certificates
Siemens Mobility - Industrial Engg Job Simulation
Forage2026
HackVerse Hackathon
HackWithIndia2025
MATLAB Onramp
MathWorks2025