11/16/2026 updated

**** ******** ****
100 % available

Senior Automation Engineer | PCS7, SCADA, DCS, Functional Safety | 19+ Years

Belgrade, Serbia
Worldwide
dipl.ing - University of Belgrade, School of Electrical Engineering – Automation & Control
Belgrade, Serbia
Worldwide
dipl.ing - University of Belgrade, School of Electrical Engineering – Automation & Control

Profile attachments

Igor_Rokvic_Freelancermap_CV.pdf

Building AutomationFunctional SafetySupervisory Control and Data Acquisition (SCADA)Tia PortalControl Systems DesignPCS 7
Senior Automation & Control Systems Engineer with 18+ years of experience in industrial and process automation, DCS/SCADA engineering, PLC programming, commissioning, FAT/SAT and technical project coordination.
Strong hands-on experience with Siemens automation platforms, including:
• Siemens PCS 7 V8 – approx. 3–5 years hands-on experience
• PCS 7 CFC / SFC
• PCS 7 AS and OS Engineering
• Redundant PCS 7 systems
• PCS 7 APL – working experience
• Siemens STEP 7 Classic
• Siemens TIA Portal
• S7-300 / S7-400 / S7-1200 / S7-1500
• S7-1500F / Safety PLC
• WinCC Classic and WinCC Professional
• Safety / F-CPU programming
• PROFIBUS / PROFINET
• Modbus TCP / RTU
• OPC / OPC UA
• Industrial Ethernet
Additional automation platforms and SCADA experience:
• Omron PLC systems
• Citect SCADA
• GE iFIX
Engineering and project experience includes:
• DCS / SCADA architecture and system integration
• PLC and process-control application development
• Control sequences, interlocks and alarm handling
• ESD logic and Safety PLC systems
• Cause & Effect implementation
• Functional descriptions and control philosophy
• P&ID, I/O and interface review
• Package unit and third-party system integration
• FAT / SAT / SIT
• Cold and hot commissioning
• Troubleshooting and process optimization
• Brownfield upgrades and migration of existing automation systems
• Technical specifications and tender documentation
• Vendor and subcontractor coordination
• Technical supervision and design review
Functional Safety:
FS Engineer (TÜV Rheinland) – Safety Instrumented Systems.
Practical experience with ESD systems, Safety PLCs and Cause & Effect logic. Knowledge of SIL assignment and verification methodologies, SRS, SIS design and Functional Safety Management.
Licensed Designer for Measurement, Regulation and Control (MRU) Systems by the Serbian Chamber of Engineers.
Relevant industry experience:
• Energy and utilities
• Water and wastewater treatment
• Pharmaceutical and cleanroom systems
• HVAC / BMS / EMS
• Metallurgy
• Manufacturing and packaging
• Oil and fuel storage
• Major infrastructure projects
Selected project experience includes PCS 7 system upgrades and reconstruction, development of complete ESD and process-control applications, SCADA/DCS integration, pharmaceutical BMS/EMS systems, wastewater treatment automation and technical supervision of large infrastructure automation projects.
Available for B2B freelance and contract assignments through ROKING d.o.o., Serbia.
Remote from Serbia, available for international travel, FAT/SAT, commissioning and temporary relocation for long-term projects.

Experience

Professional experience10+ years
Freelancer since2017

Languages

GermanBasic knowledgeEnglishFluentItalianBasic knowledgeSerbianNative speaker

Project history

PMC / Automation & SCADA Consultant

Deutsche Bahn AG – PMC Consultant, Belgrade Metro Project

Transport & Logistics

PMC Automation & SCADA Consultant on a major metro infrastructure project.
Main responsibilities:
• Technical review of BMS, SCADA and automation system design for stations and depot
• Review of PLC/RTU architecture and system interfaces
• Coordination of BMS–SCADA–OCC/BOCC integration
• Review of communication and telecom interfaces relevant to automation systems
• Interface management between Civil/MEP systems and railway-system contractors
• Review of functional requirements, technical documentation and system architecture
• Participation in design coordination and integration meetings
• Review of FAT/SIT integration strategy and commissioning approach
• Identification of integration risks, missing interface definitions and scope-boundary issues
• Technical coordination between multiple system contractors and stakeholders

Automation Lead / Licensed Automation Supervisor

Public Utility Company “Beogradske Elektrane” - Serbia

Energy, Water & Environment

Automation Lead and Licensed Automation Supervisor for the EXPO 2027 Belgrade trigeneration plant project.
From May 2024 to March 2025, while working for Siemens Energy, I acted as Automation Lead responsible for automation engineering, coordination and integration of the DCS and associated process-control systems.
Since returning to ROKING d.o.o., I have continued on the same project as a licensed automation supervisor / technical consultant, responsible for technical supervision and review of automation implementation.
Main responsibilities:
• Review and coordination of P&ID, DCS and automation system design
• Review of functional descriptions, control philosophy and control sequences
• DCS/MRU integration and package-unit interface coordination
• Review of I/O lists, communication interfaces and control-system architecture
• Technical coordination between designers, equipment suppliers and contractors
• FAT, SAT and SIT strategy and commissioning-readiness review
• Review of emergency shutdown and safe-stop requirements
• Technical supervision of automation-related documentation and implementation
• Identification and resolution of interface and integration issues between DCS, package units and field systems

Senior PCS 7 Automation / ESD Engineer

Directorate for Commodity Reserves - Pozega, Serbia

Energy, Water & Environment

Senior PCS 7 Automation / ESD Engineer for the reconstruction and upgrade of an existing oil-derivatives tank farm automation system.
The project included migration and modernization of the existing Siemens PCS 7 system to a newer version, together with the redesign and implementation of the complete process-control and emergency shutdown functionality.
I independently engineered and implemented the complete ESD and process-control application in PCS 7.
Main responsibilities:
• Upgrade and reconstruction of the existing Siemens PCS 7 system
• Migration of the existing control system to a newer PCS 7 version
• Complete engineering and implementation of the process-control application
• Complete engineering and implementation of the ESD system
• Safety PLC / F-System application development
• Cause & Effect logic implementation
• Development and modification of control sequences, interlocks and alarms
• AS and OS engineering
• CFC / SFC engineering
• Integration of field instrumentation and third-party systems
• Functional testing and commissioning support
• Troubleshooting and optimization of the upgraded automation system
• Technical documentation and system handover support

Lead Automation Engineer – BMS/EMS

JSC Pharmasyntez-Nord St. Petersburg, Russia

Pharmaceuticals & Medical Technology

Lead Automation Engineer for BMS and EMS automation of a pharmaceutical manufacturing facility with cleanroom areas.
Main responsibilities:
• Development of automation applications based on Siemens controllers and WinCC SCADA
• Engineering of BMS and EMS functions for HVAC and cleanroom systems
• Development of control logic, alarms, trends and operator visualization
• Integration of field instrumentation and HVAC equipment
• Commissioning and functional testing of automation systems
• Preparation of technical and validation documentation
• Support of validation activities in accordance with GAMP 5 principles
• Engineering in accordance with ISO 14644 cleanroom requirements
• Coordination with electrical, HVAC and validation teams

Electrical / Automation Project Engineer

Bilthoven Biologicals - Bilthoven, Netherlands

Pharmaceuticals & Medical Technology

Electrical and automation engineering for HVAC systems serving pharmaceutical cleanroom facilities.
Main responsibilities:
• Electrical design and engineering of automation systems for HVAC installations
• Design and preparation of control cabinets for air handling units
• Coordination of electrical installation works
• Installation and integration of field instrumentation and automation equipment
• Cabling and connection of field devices
• Technical coordination with HVAC and electrical teams
• Support during testing, commissioning and project handover
• Engineering activities in a pharmaceutical cleanroom environment

PCS 7 Engineer

Sunoko sugar factory - Serbia

Industry & Mechanical Engineering

Long-term maintenance, development and upgrade of the Siemens PCS 7 process control system for a sugar production plant.
Main responsibilities:
• PCS 7 application development and system modifications
• CFC and SFC engineering
• AS and OS engineering
• Configuration of control loops, sequences, interlocks and alarms
• Commissioning and startup support
• Troubleshooting and fault diagnostics
• Process optimization and system improvements
• Maintenance and continuous upgrade of the existing PCS 7 system


Contact form

Log in to get in touch

You need to be logged in to use the contact form.

Sign upLog in