Software Integration Engineer
Thyssenkrupp
(>10.000 employees)
Keywords
Skills
Software Integration Test
Engineer Working on Steering Wheel CoreSW projects in Thyssenkrupp Budapest with the following responsabilities:
▪ Planning and analyzing software integration test and requirements.
▪ Creating the test strategy.
▪ Develop python scripts in Pycharm.
▪ Running python scripts on a HIL.
▪ Analyse of the XCP measurement.
▪ Report defects and mentaint a good workflow of the features responsible.
SystemIntegration
Engineer Working on Motorized Seat Belt (MSB) project
Joyson Safety Systems(Timisoara/Berlin):
▪ Planning and analyzing integration test and requirements.
▪ Creating the test strategy.
▪ Develop scripts according to the specification.
▪ Develop and automate test cases after system design.
▪ Execution of the created test cases on the test bench.
▪ Reporting defects and documenting the results. Tools used: Jira / Doors / vTestStudio / Vector CANoe / vVirtual Target / DaVinciConfiguratorSystem
Test Engineer (Verification Test) Magna Electronics (Munich,Germany) Working on BMW ADAS project (Lidar and Adcam) and involved in both Software System and Vehicle Testing.
System test: ▪ Develop and automate test cases after customer and system ▪ Execution of the created test cases.
▪ BUS Communication test using RBS (ETH and CAN).
▪ End to end system test
bench responsible
(PC - DUT - LiDAR) chain involving: -> Vector CANoe simulation/configuration -> Running pythonscripts
for CV platform -> SerDes communication containing MIPI CSI-2 AND I2C interfaces Vehicle Test: ▪ Creating vehicle test cases after use cases.
▪ Responsible for setting up and maintaining vehicle test bench setup.
▪ Execution of test cases after use cases.
▪ Record data using the vehicle.
Tools used: Vector CANoe / Ediabas / E-Sys / Carmen / Python (PyCharm) / Trace32 / Technica Media Gateway / Putty / PTCIntegritySoftware System Test Continental Automotive (Timisoara,Romania) ▪ Working for Ford Project for Instrument Panel Cluster ECU and responsible for developing and execution of test cases after customer requirements
. ▪ Driver Assistance Responsible on Ford project with
the following tasks: ▪ IPMA (Image Processing Module A) with features that includes: Traffic Sign Recognition / Traffic Jam Assist / Lane Departure Warning System.
▪ Active Safety feature responsible: Adaptive Cruise Control / Intelligent Adaptive Cruise Control and Pre-CollisionAssist
▪ Passive Safety feature secondary responsible:
Seatbelt ▪
Develop test cases based on customer and system requirements ▪ Automationof
test cases ▪ Reviews ▪ Creation of test reports ▪ Car Test Responsible on Ford project that includes testing different types of cars based on different types of test scenarios Tools used: Vector CANoe / Doors / MKS
Engineer Working on Steering Wheel CoreSW projects in Thyssenkrupp Budapest with the following responsabilities:
▪ Planning and analyzing software integration test and requirements.
▪ Creating the test strategy.
▪ Develop python scripts in Pycharm.
▪ Running python scripts on a HIL.
▪ Analyse of the XCP measurement.
▪ Report defects and mentaint a good workflow of the features responsible.
SystemIntegration
Engineer Working on Motorized Seat Belt (MSB) project
Joyson Safety Systems(Timisoara/Berlin):
▪ Planning and analyzing integration test and requirements.
▪ Creating the test strategy.
▪ Develop scripts according to the specification.
▪ Develop and automate test cases after system design.
▪ Execution of the created test cases on the test bench.
▪ Reporting defects and documenting the results. Tools used: Jira / Doors / vTestStudio / Vector CANoe / vVirtual Target / DaVinciConfiguratorSystem
Test Engineer (Verification Test) Magna Electronics (Munich,Germany) Working on BMW ADAS project (Lidar and Adcam) and involved in both Software System and Vehicle Testing.
System test: ▪ Develop and automate test cases after customer and system ▪ Execution of the created test cases.
▪ BUS Communication test using RBS (ETH and CAN).
▪ End to end system test
bench responsible
(PC - DUT - LiDAR) chain involving: -> Vector CANoe simulation/configuration -> Running pythonscripts
for CV platform -> SerDes communication containing MIPI CSI-2 AND I2C interfaces Vehicle Test: ▪ Creating vehicle test cases after use cases.
▪ Responsible for setting up and maintaining vehicle test bench setup.
▪ Execution of test cases after use cases.
▪ Record data using the vehicle.
Tools used: Vector CANoe / Ediabas / E-Sys / Carmen / Python (PyCharm) / Trace32 / Technica Media Gateway / Putty / PTCIntegritySoftware System Test Continental Automotive (Timisoara,Romania) ▪ Working for Ford Project for Instrument Panel Cluster ECU and responsible for developing and execution of test cases after customer requirements
. ▪ Driver Assistance Responsible on Ford project with
the following tasks: ▪ IPMA (Image Processing Module A) with features that includes: Traffic Sign Recognition / Traffic Jam Assist / Lane Departure Warning System.
▪ Active Safety feature responsible: Adaptive Cruise Control / Intelligent Adaptive Cruise Control and Pre-CollisionAssist
▪ Passive Safety feature secondary responsible:
Seatbelt ▪
Develop test cases based on customer and system requirements ▪ Automationof
test cases ▪ Reviews ▪ Creation of test reports ▪ Car Test Responsible on Ford project that includes testing different types of cars based on different types of test scenarios Tools used: Vector CANoe / Doors / MKS
Project history
06/2022
-
Present
Working as a Software Integration Test Engineer on Core projects, I am responsible with developing scripts for platform projects.
This scripts are meant to cover customer requirements based in Doors.
The entire process starting with the analysis of the requirements and ending with the scripts is under my responsibility.
This scripts are meant to cover customer requirements based in Doors.
The entire process starting with the analysis of the requirements and ending with the scripts is under my responsibility.
07/2020
-
10/2022
System Integration Enginner
Joyson Safety Systems
Working on Motorized Seat Belt (MSB) project
▪ Planning and analyzing integration test and requirements.
▪ Creating the test strategy.
▪ Develop scripts according to the specification.
▪ Develop and automate test cases after System Design.
▪ Execution of the created test cases on the test bench.
▪ Reporting defects and documenting the results.
Tools used: Jira / Doors / vTestStudio / Vector CANoe / vVirtual Target / DaVinci Configurator
▪ Planning and analyzing integration test and requirements.
▪ Creating the test strategy.
▪ Develop scripts according to the specification.
▪ Develop and automate test cases after System Design.
▪ Execution of the created test cases on the test bench.
▪ Reporting defects and documenting the results.
Tools used: Jira / Doors / vTestStudio / Vector CANoe / vVirtual Target / DaVinci Configurator
04/2019
-
07/2020
System Test Engineer
Magna Electronics
(Automotive and vehicle construction)
Working on BMW ADAS project (Lidar and Adcam) and involved in both Software System and Vehicle Testing.
System Test:
▪ Develop and automate test cases after customer and system requirements.
▪ Execution of the created test cases.
▪ BUS Communication test using RBS (ETH and CAN).
▪ End to end system test bench responsible (PC - DUT - LiDAR) chain involving:
-> Vector CANoe simulation/configuration
-> Running python scripts for CV platform
-> SerDes communication containing MIPI CSI-2 AND I2C interfaces
Vehicle Test:
▪ Creating vehicle test cases after Use Cases.
▪ Responsible for setting up and maintaining vehicle test bench setup.
▪ Execution of test cases after Use Cases.
▪ Record data using the vehicle.
System Test:
▪ Develop and automate test cases after customer and system requirements.
▪ Execution of the created test cases.
▪ BUS Communication test using RBS (ETH and CAN).
▪ End to end system test bench responsible (PC - DUT - LiDAR) chain involving:
-> Vector CANoe simulation/configuration
-> Running python scripts for CV platform
-> SerDes communication containing MIPI CSI-2 AND I2C interfaces
Vehicle Test:
▪ Creating vehicle test cases after Use Cases.
▪ Responsible for setting up and maintaining vehicle test bench setup.
▪ Execution of test cases after Use Cases.
▪ Record data using the vehicle.
07/2015
-
04/2019
Software System Test Engineer (Verification Test) | Vehicle Test
Continental Automotive Romania
(Automotive and vehicle construction)
▪ Working for Ford Project for Instrument Panel Cluster ECU and responsible for developing and execution of test cases after customer requirements.
▪ Driver Assistance Responsible on Ford project with the following tasks:
▪ IPMA (Image Processing Module A) with features that includes: Traffic Sign Recognition / Traffic Jam Assist / Lane Departure Warning System.
▪ Active Safety feature responsible: Adaptive Cruise Control / Intelligent Adaptive Cruise Control and Pre-Collision Assist.
▪ Pasive Safety feature secondary responsible: Seatbelt
▪ Develop test cases based on customer and system requirements
▪ Automation of test cases
▪ Reviews
▪ Creation of test reports
▪ Car Test Responsible on Ford project that includes testing different types of cars based on different types of test scenarios
▪ Driver Assistance Responsible on Ford project with the following tasks:
▪ IPMA (Image Processing Module A) with features that includes: Traffic Sign Recognition / Traffic Jam Assist / Lane Departure Warning System.
▪ Active Safety feature responsible: Adaptive Cruise Control / Intelligent Adaptive Cruise Control and Pre-Collision Assist.
▪ Pasive Safety feature secondary responsible: Seatbelt
▪ Develop test cases based on customer and system requirements
▪ Automation of test cases
▪ Reviews
▪ Creation of test reports
▪ Car Test Responsible on Ford project that includes testing different types of cars based on different types of test scenarios
Local Availability
Only available in these countries:
Romania
I am flexible to travel in different locations in Europe.
